Installing the GoPiGo Python Library

Installing the GoPiGo Python Library

If you are using the Dexter Industries SD card or the Dexter Industries Image, then the GoPiGo library comes preinstalled with the SD card.

If you are using your own version of Raspbian then you will have to install the Python Library

To install the GoPiGo library:

  1. Clone the GoPiGo Repository from Github
     sudo git clone https://github.com/DexterInd/GoPiGo.git

    Clone the python library

  2. Go to the Python folder
     cd GoPiGo/Software/Python/

    open the folder

  3. Install the python library
     sudo python setup.py install

    Install the library

The library should be installed now.

Go over to the example section and try out some examples.

Have a question or a suggestion?  Go check out our support page here or post it on the forums here